RedHatEnterpriseLinux67关闭透明大页面及透明大页面基础概念

https://access.redhat.com/solutions/46111

环境

• Red Hat Enterprise Linux (RHEL) 6
• Red Hat Enterprise Linux (RHEL) 7

问题

• How do transparent hugepages work in RHEL 6?
• How are transparent hugepages activated by a process?
• Do we still need to preallocate some amount of memory for use as (transparent) hugepages?
• How can I see the number of transparent hugepages that are actually in use on the system (either globally or by individual processes)?
• How do I enable HugePages on Red Hat Enterprise Linux?
• How do I disable HugePages on Red Hat Enterprise Linux?
• Freezing issue while streaming out from RHEL 6.2 server, We are providing a streaming platform (RTSP, HLS) to our customers, based on RHEL 6.2 x86_64
  While streaming out, we experiencing delays (more than one to ten seconds) because of a process freeze and at the same point in time a bunch of memory is being freed
• Need assistance to Disable Transparent Huge Pages (THP) in RHEL 7.4

决议

Note:
Transparent Huge Pages are  not available on the 32-bit version of RHEL 6.
For RHEL 7 see  How to disable transparent hugepages (THP) on Red Hat Enterprise Linux 7
For RHEL 8 see  How to disable transparent hugepages (THP) on Red Hat Enterprise Linux 8

创新互联公司专业为企业提供德阳网站建设、德阳做网站、德阳网站设计、德阳网站制作等企业网站建设、网页设计与制作、德阳企业网站模板建站服务，十年德阳做网站经验，不只是建网站，更提供有价值的思路和整体网络服务。

Transparent Huge Pages (THP) are enabled by default in RHEL 6 for  all applications. The kernel attempts to allocate hugepages whenever possible and any Linux process will receive 2MB pages if the mmap region is 2MB naturally aligned. The main kernel address space itself is mapped with hugepages, reducing TLB pressure from kernel code. For general information on Hugepages, see:  What are Huge Pages and what are the advantages of using them?

The kernel will always attempt to satisfy a memory allocation using hugepages. If no hugepages are available (due to non availability of physically continuous memory for example) the kernel will fall back to the regular 4KB pages. THP are also swappable (unlike hugetlbfs). This is achieved by breaking the huge page to smaller 4KB pages, which are then swapped out normally.

But to use hugepages effectively, the kernel must find physically continuous areas of memory big enough to satisfy the request, and also properly aligned. For this, a  khugepaged kernel thread has been added. This thread will occasionally attempt to substitute smaller pages being used currently with a hugepage allocation, thus maximizing THP usage.

In userland, no modifications to the applications are necessary (hence transparent). But there are ways to optimize its use. For applications that want to use hugepages, use of  posix_memalign() can also help ensure that large allocations are aligned to huge page (2MB) boundaries.

Also, THP is only enabled for anonymous memory regions. There are plans to add support for tmpfs and page cache. THP tunables are found in the  /sys tree under  /sys/kernel/mm/redhat_transparent_hugepage.

The values for  /sys/kernel/mm/redhat_transparent_hugepage/enabled can be one of the following:

always   -  always use THP
never    -  disable THP

khugepaged will be automatically started when  transparent_hugepage/enabled is set to "always" or "madvise, and it'll be automatically shutdown if it's set to "never". The  redhat_transparent_hugepage/defrag parameter takes the same values and it controls whether the kernel should make aggressive use of memory compaction to make more hugepages available.

Check system-wide THP usage

Run the following command to check system-wide THP usage:

# grep AnonHugePages /proc/meminfo 
AnonHugePages:    632832 kB

Note: Red Hat Enterprise Linux 6.2 or later publishes additional THP monitoring via  /proc/vmstat:

# egrep 'trans|thp' /proc/vmstat
nr_anon_transparent_hugepages 2018
thp_fault_alloc 7302
thp_fault_fallback 0
thp_collapse_alloc 401
thp_collapse_alloc_failed 0
thp_split 21

Check THP usage per process

Run the following command to monitor which processes are using THP:

    # grep -e AnonHugePages  /proc/*/smaps | awk  '{ if($2>4) print $0} ' |  awk -F "/"  '{print $0; system("ps -fp " $3)} '
/proc/7519/smaps:AnonHugePages:    305152 kB
UID        PID  PPID  C STIME TTY          TIME CMD
qemu      7519     1  1 08:53 ?        00:00:48 /usr/bin/qemu-system-x86_64 -machine accel=kvm -name rhel7 -S -machine pc-i440fx-1.6,accel=kvm,usb=of
/proc/7610/smaps:AnonHugePages:    491520 kB
UID        PID  PPID  C STIME TTY          TIME CMD
qemu      7610     1  2 08:53 ?        00:01:30 /usr/bin/qemu-system-x86_64 -machine accel=kvm -name util6vm -S -machine pc-i440fx-1.6,accel=kvm,usb=
/proc/7788/smaps:AnonHugePages:    389120 kB
UID        PID  PPID  C STIME TTY          TIME CMD
qemu      7788     1  1 08:54 ?        00:00:55 /usr/bin/qemu-system-x86_64 -machine accel=kvm -name rhel64eus -S -machine pc-i440fx-1.6,accel=kvm,us

To disable THP at boot time

Append the following to the kernel command line in  grub.conf:

transparent_hugepage=never

Note: Certain ktune and/or tuned profiles specify to enable THP when they are applied. If the  transparent_hugepage=never parameter is set at boot time, but THP does not appear to be disabled after the system is fully booted. Refer to the following article:

Disabling transparent hugepages (THP) on Red Hat Enterprise Linux 6 is not taking effect

To disable THP at run time

Run the following commands to disable THP on-the-fly:

# echo never > /sys/kernel/mm/redhat_transparent_hugepage/enabled
# echo never > /sys/kernel/mm/redhat_transparent_hugepage/defrag

• NOTE: Running the above commands will stop only creation and usage of the new THP. The THP which were created and used at the moment the above commands were run would not be disassembled into the regular memory pages. To get rid of THP completely the system should be rebooted with THP disabled at boot time.
• NOTE: Some third party application install scripts check value of above files and complain even if THP is disabled at boot time using  transparent_hugepage=never, this is due to the fact when THP is disabled at boot time, the value of  /sys/kernel/mm/redhat_transparent_hugepage/defrag will not be changed, however this is expected and system will never go in THP defragmentation code path when it is disabled at boot and THP defrag need not to be disabled separately.

How to tell if Explicit HugePages is enabled or disabled

There can be two types of HugePages in the system: Explicit Huge Pages which are allocated explicitly by  vm.nr_hugepages sysctl parameter and Transparent Huge Pages which are allocated automatically by the kernel. See below on how to tell if Explicit HugePages is enabled or disabled.

• Explicit HugePages DISABLED:

  • If the value of  HugePages_Total is "0" it means HugePages is  disabled on the system.

    Raw

    # grep -i HugePages_Total /proc/meminfo 
    HugePages_Total:       0

  • Similarly, if the value in  /proc/sys/vm/nr_hugepages file or  vm.nr_hugepages sysctl parameter is "0" it means HugePages is  disabled on the system:

    Raw

    # cat /proc/sys/vm/nr_hugepages 
    # sysctl vm.nr_hugepages
    vm.nr_hugepages = 0

• Explicit HugePages ENABLED:

  • If the value of  HugePages_Total is greater than "0", it means HugePages is  enabled on the system:

    Raw

    # grep -i HugePages_Total /proc/meminfo 
    HugePages_Total:       1024

  • Similarly if the value in  /proc/sys/vm/nr_hugepages file or  vm.nr_hugepages sysctl parameter is greater than "0", it means HugePages is  enabled on the system:

    Raw

    # cat /proc/sys/vm/nr_hugepages 
    1024
    # sysctl vm.nr_hugepages
    vm.nr_hugepages = 1024

Comments

• RHEL 6 disables THP on systems with < 1G of ram. Refer to Red Hat  Bug 618444 - disable transparent hugepages by default on small systems for more information.
• Disadvantages of using the explicit hugepages (libhugetlbfs): Using hugetlbfs requires significant work from both application developers and system administrators; explicit hugepages must be set aside at boot time, and applications must map them explicitly. The process is fiddly enough that use of hugetlbfs is restricted to those who really care and who have the time to mess with it. Hugetlbfs is often seen as a feature for large, proprietary database management systems and little else.