SRX与Cisco之间的port-channel配置
Cisco与SRX之间的port-channel配置：【两都可以配置为on模式、也可以利用LACP配置为双active或者是一端active一段passive】
为长宁等地区用户提供了全套网页设计制作服务，及长宁网站建设行业解决方案。主营业务为网站设计、成都网站设计、长宁网站设计，以传统方式定制建设网站，并提供域名空间备案等一条龙服务，秉承以专业、用心的态度为用户提供真诚的服务。我们深信只要达到每一位用户的要求，就会得到认可，从而选择与我们长期合作。这样，我们也可以走得更远！
方法一：
Cisco配置：
CORE-SW#show running-config interface gigabitEthernet 0/35
Building configuration...
Current configuration : 92 bytes
!
interface GigabitEthernet0/35
no switchport
no ip address
channel-group 1 mode on
end
CORE-SW#show running-config interface gigabitEthernet 0/36
Building configuration...
Current configuration : 92 bytes
!
interface GigabitEthernet0/36
no switchport
no ip address
channel-group 1 mode on
end
CORE-SW#show running-config interface port-channel 1
Building configuration...
Current configuration : 85 bytes
!
interface Port-channel1
no switchport
ip address 10.10.10.1 255.255.255.252
end
SRX配置：
lab# show interfaces fe-0/0/2
fastether-options {
802.3ad ae0;
}
[edit]
lab# show interfaces fe-0/0/3
fastether-options {
802.3ad ae0;
}
[edit]
lab# show interfaces ae0
unit 0 {
family inet {
address 10.10.10.2/30;
}
}
[edit]
方法二：
CORE-SW#show running-config interface gigabitEthernet 0/35
Building configuration...
Current configuration : 119 bytes
!
interface GigabitEthernet0/35
no switchport
no ip address
channel-protocol lacp
channel-group 1 mode active
end
CORE-SW#show running-config interface gigabitEthernet 0/36
Building configuration...
Current configuration : 119 bytes
!
interface GigabitEthernet0/36
no switchport
no ip address
channel-protocol lacp
channel-group 1 mode active
end
CORE-SW#show run
CORE-SW#show running-config in
CORE-SW#show running-config interface port-c
CORE-SW#show running-config interface port-channel 1
Building configuration...
Current configuration : 85 bytes
!
interface Port-channel1
no switchport
ip address 10.10.10.1 255.255.255.252
end
SRX配置:
lab> configure
Entering configuration mode
[edit]
lab# show interfaces fe-0/0/2
fastether-options {
802.3ad ae0;
}
[edit]
lab# show interfaces fe-0/0/3
fastether-options {
802.3ad ae0;
}
[edit]
lab# show interfaces ae0
aggregated-ether-options {
lacp {
passive;
}
}
unit 0 {
family inet {
address 10.10.10.2/30;
}
}
[edit]
本文名称：SRX与Cisco之间的port-channel配置
URL分享：http://cdiso.cn/article/gpjjse.html
